COMPANY HEADER
Request Information
  • Complete lead screw actuated system, ready for installation
  • Standard (BY) or anti-backlash (NTBY & VHDY) nuts
  • Lead accuracies to 0.0006 in/in (mm/mm)
  • Repeatable within 0.0005 in (0.01 mm)
  • Aluminum support beams, steel beams or unmounted (without beams)
  • Basic wheel plate or wiper wheel plate
  • Optional NEMA and IEC motor mounts
  • Standard and corrosion resistant versions available
Unit of Measure

Specifications

System Size

 N/A 3

Carriage Assembly Load Capacities

Axial Load Capacity (LA)

 N/A 6668 N1499 lb

Radial Load Capacity (LR)

 N/A 11564 N2600 lb

Pitch Moment Capacity (MP)

 N/A 346 N·m254.9 ft·lbf

Yaw Moment Capacity (MY)

 N/A 599 N·m442.1 ft·lbf

Roll Moment Capacity (MR)

 N/A 372 N·m274.1 ft·lbf

Lead Screw Thrust Capacities

Screw Diameter

 N/A 1/2 in5/8 in

Nut Type

 N/A BY NTBY

Dynamic Load Capacity - BY Nut

N/A 1000 N225 lb

Dynamic Load Capacity - NTBY Nut

N/A 444 N100.0 lb

Wiper Wheel Plate Dimensions

Wiper Wheel Plate - Track Plate Length TPL (=TL+CL) - BY Nut

 N/A TL+180.3 mmTL+7.099 in

Wiper Wheel Plate - Track Plate Length TPL (=TL+CL) - NTBY Nut

 N/A TL+195.4 mmTL+7.694 in

Wiper Wheel Plate - System Length (SL)

N/A TPL+112.6 mmTPL+4.434 in

Wiper Wheel Plate - System Base Length (SBL)

 N/A TPL+76.9 mmTPL+3.027 in

Wiper Wheel Plate - System Height (SH) - Aluminum

N/A 172.3 mm6.784 in

Wiper Wheel Plate - System Height (SH) - Steel

 N/A 103.1 mm4.060 in

Wiper Wheel Plate - System Height (SH) - Un-mounted

 N/A 52.3 mm2.060 in

Wiper Wheel Plate - Carriage Height (CH) - Aluminum

 N/A 163.0 mm6.417 in

Wiper Wheel Plate - Carriage Height (CH) - Steel

 N/A 93.8 mm3.693 in

Wiper Wheel Plate - Carriage Height (CH) - Un-mounted

 N/A 43.0 mm1.693 in

Basic Wheel Plate Dimensions

Basic Wheel Plate - Track Plate Length TPL (=TL+CL) - BY Nut

 N/A TL+172.0 mmTL+6.772 in

Basic Wheel Plate - Track Plate Length TPL (=TL+CL) - NTBY Nut

 N/A TL+172.0 mmTL+6.772 in

Basic Wheel Plate - System Length (SL)

 N/A TPL+112.6 mmTPL+4.434 in

Basic Wheel Plate - System Base Length (SBL)

 N/A TPL+76.9 mmTPL+3.027 in

Basic Wheel Plate - System Height (SH) - Aluminum

N/A 177.0 mm6.969 in

Basic Wheel Plate - System Height (SH) - Steel

 N/A 107.8 mm4.245 in

Basic Wheel Plate - System Height (SH) - Un-mounted

 N/A 57.0 mm2.244 in

Fixed End Dimensions

Dimension C

 N/A 81.0 mm3.189 in

Dimension W

 N/A 101.6 mm4.000 in

Dimension SC

 N/A 28.88 mm1.137 in

Mounting Hardware (RF)

 N/A M6

Fixed End Dimension A

N/A 13.0 mm0.512 in

Fixed End Dimension B

N/A 26.0 mm1.024 in

Fixed End Length (FEL)

 N/A 87.0 mm3.424 in

Fixed End Height (FEH)

 N/A 52.3 mm2.060 in

Fixed End Housing Length (FEHL)

 N/A 52.0 mm2.047 in

Fixed End Shaft Diameter (SHFTD)

 N/A 12.0 mm0.472 in

Fixed End Shaft Key Size (SHFTK)

 N/A 4 mm X 10 mm

Fixed End Mounting Hole Width (FEMHW)

 N/A 39.62 mm1.560 in

Fixed End Mounting Hole Height (FEMHH)

 N/A 36.58 mm1.440 in

Fixed End Mounting Hole Thread (FEMHT)

 N/A M5 X 13

Fixed End Pilot Diameter (FEP)

 N/A 45.72 mm1.800 in

Fixed End Pilot Depth (FEPD)

 N/A 1.91 mm0.075 in

Simple End Dimensions

Simple End Length (SEL)

 N/A 24.9 mm0.980 in

Simple End Height (SEH)

 N/A 42.5 mm1.673 in

Simple End Dimension D

N/A 12.9 mm0.508 in

Wiper Wheel Plate Option Dimensions

Wiper Wheel Plate Options Part Number

 N/A LP3WPALS_

Wiper Wheel Plate Options - Overall Length (A)

 N/A 177.6 mm6.990 in

Wiper Wheel Plate Options - Overall Width (B)

 N/A 161.3 mm6.350 in

Wiper Wheel Plate Options - Assembly Height ( C )

 N/A 35.6 mm1.403 in

Wiper Wheel Plate Options - Height (D)

 N/A 30.3 mm1.193 in

Wiper Wheel Plate Options - Wheel Vee Height (E)

 N/A 18.0 mm1.193 in

Wiper Wheel Plate Options - Wheel Spacing Length (F)

 N/A 101.6 mm4.000 in

Wiper Wheel Plate Options - Wheel Spacing Width (G)

 N/A 109.22 mm4.300 in

Wiper Wheel Plate Options - Mounting Hole Length 1 (H)

 N/A 38.0 mm1.496 in

Wiper Wheel Plate Options - Mounting Hole Length 2 (I)

 N/A 100.0 mm3.937 in

Wiper Wheel Plate Options - Mounting Hole Width 1 (J)

 N/A 100.0 mm3.937 in

Wiper Wheel Plate Options - Mounting Hole Width 2 (K)

 N/A 50.0 mm1.969 in

Wiper Wheel Plate Options - Mounting Hole Thread (L)

 N/A M8 X 1.25

Wiper Wheel Plate Options - Coupler Mounting Height (P)

 N/A 14.1 in0.556 mm

Wiper Wheel Plate Options - Weight

N/A 1651 g

Basic Wheel Plate Option Dimensions

Basic Wheel Plate Options - Part Number of Track Lubricators

 N/A BWP2SWTLLS

Basic Wheel Plate Options - Part Number of Wheel Covers

 N/A BWP3SWWCLS

Basic Wheel Plate Options - Overall Length (A)

 N/A 172.0 mm6.770 in

Basic Wheel Plate Options - Overall Width (B)

 N/A 172.0 mm6.500 in

Basic Wheel Plate Options - Assembly Height ( C )

 N/A 39.93 mm1.572 in

Basic Wheel Plate Options - Wheel Plate Height ( D )

 N/A 18.36 mm0.723 in

Basic Wheel Plate Options - Wheel Vee Height (E)

 N/A 32.00 mm1.260 in

Basic Wheel Plate Options - Wheel Spacing Length (F)

 N/A 101.6 mm4.000 in

Basic Wheel Plate Options - Wheel Spacing Width (G)

 N/A 109.22 mm4.300 in

Basic Wheel Plate Options - Mounting Hole Length (H)

 N/A 100.0 mm3.937 in

Basic Wheel Plate Options - Mounting Hole Width 1 (I)

 N/A 50.0 mm3.937 in

Basic Wheel Plate Options - Mounting Hole Width 2 (J)

 N/A 50.0 mm1.969 in

Basic Wheel Plate Options - Mounting Hole Thread (K)

 N/A M8 X 1.25

Basic Wheel Plate Options - Coupler Mounting Hole to Edge (O)

 N/A 10.0 mm0.394 in

Basic Wheel Plate Options - Coupler Mounting Hole to Hole Length (P)

 N/A 18.0 mm0.709 in

Basic Wheel Plate Options - Coupler Mounting Hole Width (Q)

 N/A 32.0 mm1.260 in

Basic Wheel Plate Options - Coupler Fastener (R)

 N/A M4

Basic Wheel Plate Options - Weight

N/A 1984 g

Aluminum Support Beam Dimensions

Part Number of Aluminum Support Beam

 N/A LP3SBEXT

Width of Aluminum Support Beam

 N/A 120.0 mm4.724 in

Height of Aluminum Support Beam

N/A 120.0 mm4.724 in

Cross Sectional Area of Aluminum Support Beam

N/A 7.98 in²5146.6 mm²

Moment of Inertia about X-axis of Aluminum Support Beam

 N/A 8.537 X 106 mm420.50 in4

Moment of Inertia about Y-axis of Aluminum Support Beam

 N/A 8.490 X 106 mm420.40 in4

LoPro T-Slot A

 N/A 81.0 mm3.189 in

LoPro T-Slot B

 N/A 40.0 mm1.575 in

LoPro T-Slot C

 N/A 80.0 mm3.150 in

Maximum Length of Aluminum Support Beam

 N/A 5.6 m18.37 ft

Steel Support Beam Dimensions

Part Number of Steel Support Beam

 N/A LP3LSBS

Width of Steel Support Beam

 N/A 127.0 mm5.000 in

Height of Steel Support Beam

N/A 50.8 mm2.000 in

Thickness of Steel Support Beam

 N/A 4.8 mm0.190 in

Cross Sectional Area of Steel Support Beam

N/A 1509.0 mm²2.34 in²

Moment of Inertia about X-axis of Steel Support Beam

 N/A 6.394 mm41.54 in4

Moment of Inertia about Y-axis of Steel Support Beam

 N/A 2.711 X 106 mm46.51 in4

Maximum Length of Steel Support Beam

 N/A 14.6 m48 ft

System Components

N/A Linear Guide
The linear guide consists of a track plate assembly and wheel plate assembly, each wheel plate assembly containing four DualVee wheels.
Support Beams

  • Aluminum (standard)
  • Steel (standard)
  • Stainless Steel (custom)
Wiper wheel plate
Wiper wheel plate assembly shown consisting of four DualVee wheels, bushings and a carriage plate.
Track plate
Track plate assembly consisting of two or more lengths of induction hardened steel track mounted to an anodized aluminum substrate.
Fixed End Bearing Support
Double row, preloaded, angular contact ball bearings.

Multi-Industry Applications

N/A DualVee-based linear guides are popular worldwide and used throughout a broad range of industries.

  • Machine tool
  • Laboratory
  • Automotive production
  • Industrial automation
  • Biomedical
  • Inspection equipment
  • Material handling equipment
  • Textile machinery
  • Paper processing and converting
  • Semiconductor
  • Packaging machinery
  • Electronics assembly
  • Non-contact machining equipment

Fixed End

N/A

  • Designed for high performance, high cycling linear motion
  • Fixed and simple end assemblies incorporate radial ball bearings and high strength aluminum housings

Lead Screw Actuator Options

N/A LoPro lead screws feature either BY or NTBY nut types to meet your backlash needs. Metric and inch leads are also available in lead accuracies to 0.0006 in/in (mm/mm). Lead screw systems may be selected with steel or aluminum support beams and with preference of basic or wiper wheel plates.

Wheel Plate Options

N/A There are two choices for wheel plate assemblies - wiper wheel plates and basic wheel plates. Wiper wheel plates are available with your choice of DualVee guide wheels and provide the lowest height solution. Basic wheel plates are the more economical choice and come with Integral DualVee wheels and your choice of either lubricators or wheel covers. Both the wiper wheel plate and the basic wheel plate are intended to run on track plate assemblies.

Track Plate Assemblies

N/A Track plate assemblies combine your choice of single edge DualVee track with an easy to mount aluminum base. The aluminum base is made from high precision anodized aluminum alloy. Track plate assemblies are easily butt-jointed to provide infinite lengths.

Support Beam Options

N/A Support beams are available in extruded aluminum or steel beam. The extruded aluminum beam comes with T slots for quick and easy mounting of brackets and other aluminum framing members. Steel support beams are made to ASTM A500 Grade A standards and provide a high modulus, making them a rigid mounting option.

Aluminum Support Beams

N/A

  • Designed with industry standard cross section and T-slot (10 mm) geometry
  • Compatible with HepcoMotion®’s MCS aluminum frame and machine construction system from Bishop-Wisecarver, as well as other industry profile extrusions

Motor Mount Options

N/A Our new line of motor mounts is designed to fit any manufacturer's motor or gearbox. Each motor mount is supplied as a kit, complete with shaft coupling and mounting hardware. Standard or custom mounting solutions can be provided within five days.

Gantry Brackets

N/A A wide variety of gantry brackets are available to form complete LoPro gantry systems. The gantry bracket allows numerous gantry configurations to be built by offering flexibility in the types of LoPro systems that can be assembled together and in the relative positions and orientations of the stages to each other in the assembly. Procedures for creating the most common stage configurations for gantry systems can be found in the LoPro Gantry System Assembly Manual.

Custom Options

N/A From completely custom systems to adding mounting holes, our application engineers are ready to assist you with any customization needs

Manufacturing Notes

N/A

  • Un-mounted systems are designed for mounting to a customer-supplied mounting surface, and are shipped with temporary mounting plates affixing the fixed and simple ends to the track plate. System straightness and flatness are determined by mounting surface accuracy. Continuous support along the entire system base length is required.
  • Pilot diameter tolerance is +.001/-.005 in (+0.00/-0.12 mm)
  • Shaft Keys are Square Keys.
  • For secondary wheel plate assembly, consult factory.
  • Wiper Wheel Plate Part numbers vary according to system configuration. Contact Bishop-Wisecarver for details.
  • Weights shown are for wheel plates with wheel covers and without coupling kits. Basic wheel plates with track lubricators weigh slightly less.
  • Aluminum beams are 6061-T6 aluminum alloy. Steel beams are structural steel tubing ASTM A500 Grade A.
  • Drawings are not to scale.
  • Aluminum beam not available on size 4.
  • Corrosion resistant systems are available with wiper wheel plate only. Corrosion resistant systems on stainless steel beams are custom. Contact Bishop-Wisecarver for details.
  • Wiper Wheel Plate Options Part Number vary according to system configuration. Contact Bishop-Wisecarver for details.