COMPANY HEADER
Print Back
HepcoMotion double edge Ring Slides curved segments are cut from stock rings or segments. They are matched in essential respects with their corresponding track system straight slides and ground square on the ends to a specified dimension relative to their true shape. A clearance keyway and tapped hole facility is incorporated each end to provide a method of alignment when assembled together with the mating key of the track system straight slide*1. An additional fixing hole is provided adjacent to the keyway each end to give extra support at the join position for all segments except the TR12 93 & TR12 127. All track system curved segments are marked with a reference number and sequence number and are available in stainless steel for applications requiring corrosion resistance. Segments to any number of degrees can be supplied to cater for all track system configuration
Unit of Measure

Specifications

Dimension A

N/A 468 mm

Dimension F

N/A 44.74 mm

Dimension I (± 0.025)

N/A 12.5 mm

Dimension E

N/A 44 mm

Dimension H

N/A 15.5 mm

Dimension R°

N/A 90 º180 º

Dimension W

N/A 8 mm

Dimension W1

N/A 25 mm

Dimension X

N/A 10 mm

Dimension X1 (± 0.2)

N/A 2.5 mm

Dimension Y

N/A 4 mm

Dimension Y1

N/A 6 mm

Dimension Z

N/A 7.5 mm

Dimension Z1

N/A M5 x 6

Manufacturing Notes

N/A For Straight Slides: Some distortion may be present in segments in their free unmounted state. This may be overcome by bolting to the mounting surface and setting to adjacent slides using the keyway alignment facility 41. True Shape segments are available on request