COMPANY HEADER
Print Back
When using HepcoMotion external single edge ring slides it is recommended that two concentric bearings should be placed 120ยบ apart in order to provide a datum reference. The other bearings should be eccentric type. All eccentrics may be used where positional adjustment of the ring is required. Either ring or bearings can be the moving element. The HepcoMotion PRT2 eccentric bearings are of double eccentric design with sufficient throw to enable disengagement of the ring without disassembly. One or more lubricators may be fitted at convenient positions to take advantage of the increased load/life afforded by lubrication.
External Assembled Single Edge Ring Systems
Unit of Measure
1 

Item #

Dimension A

Dimension B

Dimension C

Dimension D

Dimension E

Dimension F

REV 156 N/A 137.6 mm N/A 16.7 mm N/A 18.5 mm N/A 1.8 mm N/A 38 mm N/A 17.5 mm
REV 223 N/A 204.8 mm N/A 16.7 mm N/A 18.5 mm N/A 1.8 mm N/A 38 mm N/A 17.5 mm
RES 184 N/A 159 mm N/A 23.0 mm N/A 24.9 mm N/A 1.9 mm N/A 50 mm N/A 22.5 mm
RES 280 N/A 255 mm N/A 23.0 mm N/A 24.9 mm N/A 1.9 mm N/A 50 mm N/A 22.5 mm
RES 376 N/A 351 mm N/A 23.0 mm N/A 24.9 mm N/A 1.9 mm N/A 50 mm N/A 22.5 mm
REM 505 N/A 468.5 mm N/A 32.4 mm N/A 35 mm N/A 2.5 mm N/A 60 mm N/A 31 mm
REM 655 N/A 618.5 mm N/A 32.4 mm N/A 35 mm N/A 2.5 mm N/A 60 mm N/A 31 mm
REL 874 N/A 820 mm N/A 48.3 mm N/A 52.1 mm N/A 3.9 mm N/A 89.5 mm N/A 45.5 mm
Unit of Measure
1