COMPANY HEADER
  • Double Edge Ring Slides and Segments
HepcoMotion single edge ring segments are cut from complete 360° ring slides and held in stock in nominal 90° and 180° segments. Any length segment can be cut to customer's special order and additional holes drilled as required. Although suitable for most applications, slight out of roundness and flatness may be experienced with slide rings and segments in their free unmounted condition. This may be overcome by installing against a register and bolting to a flat surface, True shape rings and segments are available on request. Larger diameter single edge ring slides are available in the HDRT range for which there is a separate catalog
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Dimension A (± 0.2)

Dimension B (JS6) Ø

Dimension B Tolerance (±)

Dimension C Ø

Dimension C Tolerance (±)

Dimension D

N/A 148 mm N/A 161 mm N/A 0.013 mm N/A 137 mm N/A 0.037 mm N/A 128.63 mm
N/A 215.2 mm N/A 228.2 mm N/A 0.015 mm N/A 204.2 mm N/A 0.037 mm N/A 195.83 mm
N/A 165 mm N/A 182 mm N/A 0.015 mm N/A 150 mm N/A 0.039 mm N/A 139.26 mm
N/A 261 mm N/A 278 mm N/A 0.016 mm N/A 246 mm N/A 0.041 mm N/A 235.26 mm
N/A 357 mm N/A 374 mm N/A 0.018 mm N/A 342 mm N/A 0.044 mm N/A 331.26 mm
N/A 461.5 mm N/A 482.5 mm N/A 0.020 mm N/A 442.5 mm N/A 0.046 mm N/A 423.76 mm
N/A 606.5 mm N/A 627.5 mm N/A 0.022 mm N/A 587.5 mm N/A 0.048 mm N/A 568.76 mm
N/A 788 mm N/A 820 mm N/A 0.028 mm N/A 760 mm N/A 0.051 mm N/A 733.26 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1