COMPANY HEADER
  • Double Edge Ring Slides and Segments
HepcoMotion ring segments are cut from complete 360° ring slides and held in stock in nominal 90° and 180° segments. Any length segment can be cut to customer's special order and additional holes drilled as required. Although suitable for most applications, slight out of roundness and flatness may be experienced with slide rings and segments in their free unmounted condition. This may be overcome by installing against a register and bolting to a flat surface. True shape rings and segments are available on request. Larger diameter single edge ring slides are available in the HDRT range for which there is a separate catalog
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Dimension A (± 0.2)

Dimension B (JS6) Ø

Dimension B Tolerance (±)

Dimension C Ø

Dimension C Tolerance (±)

Dimension D

N/A 137.6 mm N/A 124.6 mm N/A 0.013 mm N/A 148.6 mm N/A 0.037 mm N/A 156.97 mm
N/A 204.8 mm N/A 191.8 mm N/A 0.015 mm N/A 215.8 mm N/A 0.037 mm N/A 224.17 mm
N/A 159 mm N/A 142 mm N/A 0.013 mm N/A 174 mm N/A 0.039 mm N/A 184.74 mm
N/A 255 mm N/A 238 mm N/A 0.015 mm N/A 270 mm N/A 0.041 mm N/A 280.74 mm
N/A 351 mm N/A 334 mm N/A 0.018 mm N/A 366 mm N/A 0.044 mm N/A 376.74 mm
N/A 468.5 mm N/A 447.5 mm N/A 0.020 mm N/A 487.5 mm N/A 0.046 mm N/A 506.24 mm
N/A 618.5 mm N/A 597.5 mm N/A 0.022 mm N/A 637.5 mm N/A 0.048 mm N/A 656.24 mm
N/A 820 mm N/A 788 mm N/A 0.025 mm N/A 848 mm N/A 0.051 mm N/A 874.74 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1